Building a Multi-Camera Video Using ScreenFlow

Mark Burgess

I was recently introduced to Mark Burgess through his brother Craig, who works here at Telestream. Mark is doing some really interesting video work, and even more interestingly – he’s doing all his editing using ScreenFlow. After watching one of his recent interview videos, I asked Mark if he would write up some tips for anyone trying to do multi-camera videos.

Building a Multi-Camera Video using ScreenFlow

by Mark Burgess

“A Conversation with Pianist Anne-Marie McDermott”

Talking heads have always been boring. In today’s sound-bite- and short-attention-span-online-world, videos online need to be more engaging than even television because of the other immediate alternatives available to capture attention while browsing. Fortunately, the means to produce and edit video has become so affordable that the difference between a good video and a bad one puts the focus on the technique of the maker.

Just like the Polynesian drummer in the movie “Airplane” who switches drumsticks and looks into a different camera for “a special bulletin”, you can move camera angles around a subject and re-engage the viewer. What I’ll describe are my tools and techniques for shooting the example multi-camera video interview of Pianist Anne-Marie McDermott. I used ScreenFlow to edit the entire piece; ScreenFlow’s editing interface makes it easy to cut between the segments. You can use most of the same techniques for shooting your own interview or multi-camera piece.


Here’s a supply list of what you’ll need:

Critical list:

  • 2 or more cameras
  • tripod(s) for at least one
  • a microphone separate from the camera (for interviews)
  • Duct tape

Nice to Have’s:

  • extension cord(s)
  • some form of warm colored lighting
  • light bounce diffusers
  • a quiet place to shoot

The night before a shoot, I ensure I have charged batteries in all my equipment and at least one set of backups for each. (You can never be certain that even charged batteries will last, especially rechargeable ones you’ve had for a while.)  I don’t use tapes, so I also ensure that I have sufficient disk space on my camera’s disks and memory cards.

The Cameras

Obviously, it would be better to use the same type of camera for every angle. Matching color and synchronizing sound are easier.  (In my case, I like the style of switching camera quality between points of view and don’t attempt to match them.) And there are systems that synchronize the shoot between cameras, but they remain expensive.  It would also be better to have someone manage each camera.  Most of us, though, are sole operators without the budget to have a studio and personnel.  I use the cameras I have, including my iPhone and Blackberry and I pre-position them.  I’ve even used the iSight camera on my MacBook, recording directly into ScreenFlow.

For most shoots, I use one high definition camera as the primary point of view and the only one to do any active zooming.  I mount it on a full size tripod directly in front of the subject and I stand behind it to ask questions so the subject is looking at the viewer in the finished video.  This is also the camera with the key track that contains the sound.

Using a twistable short tripod, I mount a Flip video camera somewhere else near the subject.  In the case of the example video, I placed it on the ground with an angle up toward the keyboard so her hands can be seen as they play.

The third camera is a simple, point-and-shoot Canon PowerShot. In the example video, I placed it on the piano on the opposite side of the subject from the Flip camera.  I correctly surmised that while talking she would pause to think and look in that direction.

When I’ve settled the subject and started the shoot, I start the main camera, and then I start each of the other cameras. One of the hazards, at this point, is if you’ve been cavalier about checking the cameras and you’re on your own, you could finish the interview and find one of your cameras hasn’t recorded properly. So double check your cameras before you start!

The Lighting

Once onsite, the first thing to do is find where to place your subject. In so doing, consider the sight lines behind your subject from any angle you wish to place a camera. Also, look at the light angles that will touch your subject. Bright backgrounds will put their face in the shade and a bright light on one side will give them an odd, half mask look in your video. If you have time, you can turn the cameras on and shoot yourself to see how well lit the subject will be.

I carry a small work light from Home Depot to provide additional light energy.  It’s easy to suspend from the backs of chairs and other furniture, and the light it casts is color true, so I don’t artificially change the scene. A light that’s too hot will give you sharp shadows and one that is too weak won’t fill in shadows from other lighting in the area. You can also use a bounce diffuser or even point the light at a white wall to bounce the light around your subject to fill in shadows from other directional light.

In Praise of Duct Tape

On set, I use duct tape to do everything from suspend a camera on the wall to taping down extension cords around the subject so they don’t trip during the shoot.

The Sound

My primary camera allows for a blue-tooth enabled transponder to connect to a remote and unattached microphone. I use the Sony ECM-HW1R. While mine is a bit bulky, you can still reasonably and discretely tuck it in a shirt or a suit coat. Where that’s not possible, simply setting it nearby can be enough, providing the subject doesn’t turn away from it during the shoot. I also carry a small wired microphone for backup, which requires hiding the wire and doesn’t allow the subject to move very easily or for you to shoot from very far away.

You don’t need to have a sound system integrated with your camera. You can record sound from a separate sound-only device if you like. All three of mine record sound, and that’s the primary method I use to synchronize the tracks in the editor. The key is to give yourself “key” cues.  You don’t have to go as far as a Hollywood “clap board”, all you need do is clap your hands loudly at the points you want to mark.  That gives you a nice sound spike to see in the editor view.

There are two ways to handle questions in a video interview. You can point one of your cameras at yourself or an interviewer and cut back and forth.  That’s more work in the editing room than asking your questions and then getting out of the way, figuratively.  The trick with this second approach is to resist the urge to respond to things your subject says, even if it’s a casual “uh-huh.”  For some reason, the minute you say “ohhhh”, that’s right when your subject says something you need.  However, if you don’t have a separate interviewer, your subject will expect you to engage them. So, what I do is nod a lot, smile or frown, based on what they’re saying.  If I need to break in, I’ll often hold up my hand to get their attention which usually stops them.


The ScreenFlow editing interface makes combining multiple tracks easy.  (It’s also a lot faster at importing Windows Media (AVI) and QuickTime (.MOV) files than iMovie.)  Once you import the files, you want to line them up in the timeline. Find your key sound spikes on each track and do an initial line up. To make it exact, turn off the sound on all but two of your tracks, the primary one and one other, and balance the audio between those two for volume. Then move the second track until the echo is gone. Repeat this with all of your tracks to get all the tracks lined up precisely.

Once you’ve lined them all up, select the primary track and go to Edit/Detach Audio and move the audio out to its own track. Then go to Edit/Lock and lock the sound clip. At this point, I also set all the other audio tracks to zero, so there is just one source of audio, but the audio in these tracks is still available if for some reason I need to resynch after a late edit.

Now with all your camera tracks lined up, and your audio locked in place, you can “cut” between camera angles by either adding video actions to fade in an out clips, or by splitting clips and deleting sections you don’t need.

Now comes the hard part, the one I can’t help you with much.

Review the footage and decide where you want to set the breaks. But first, do this: in a quiet room, sit for 30 seconds and watch the seconds tick by. That will give you some perspective on what you’ll be asking your users to go through. Keep in mind, especially when you’ve shot the video yourself, you tend to include more and listeners will get bored with 30 seconds of the same thing.  As another example, think about all the fast cuts that are done in a commercial on TV, and they still lose people!

There are two dangers to editing multiple tracks. First, that you’ll cut back and forth like a small child with ADD who just drank a sugary fruit drink. And second, that your cuts will be so out of context and jarring that the user will have to take time to get their bearings after each cut.  The human brain can decode patterns quickly, but there is processing time a brain goes through when you make a cut. The first time you switch angles they probably won’t expect it, so that transition should come at a subject change. When you’ve done it once, and the more you do it, the faster your viewer will adjust. Now you can make cuts for emphasis even while your subject is talking on the same topic.

Also, be judicious about your use of transition effects. That’s another pattern the viewer has to decode. ScreenFlow has some great effects.  I usually adopt one style and stay with it throughout the video.

Remember, you know what the subject said and by the time you’ve edited the video, you’ll have the piece down by heart. Your viewer will likely watch the video only once, so bias toward fewer cuts than you might want to do.

In the end, make something you would want to watch.

Mark Burgess operates, a consulting company in San Diego, California.  He gained his BA in Creative Writing from the University of Arizona and his MBA from the University of San Diego.  Definitely a Jack of all trades,  he was one of the first 500 certified Project Management Professionals and has written two books on programming and hundreds of articles.  He founded and ran it for 15 years.  He holds board positions at Mainly Mozart and Media Arts Center San Diego and is active in the Rotary Club. … And he’s doing some great stuff with ScreenFlow.


  1. Mark,

    Awesome review! Syncing multiple tracks can get tricky but your tip of detaching the main audio, in my experience, is right on the mark. Once it’s detached, it’s more accurate. This makes lining up 3 video tracks easy.

    Now that the pocket digital camcorders are so cheap, it’s easy to have 3 or 4 of them on self-standing monopods positioned around the speaker. With the Joby Gorilla pods, you can get real creative and hang them all over the place. I like how you had one on the the floor looking up so you could see her hands playing.

    Using ScreenFlow as the editing tool is critical. You can’t do this type of editing in iMovie that’s for sure. Final Cut would work but who can stand all that rendering time?

    Thanks again for sharing your technique with the community.

  2. Thanks, Scott. I would add one additional thought: some consider it unprofessional to film with multiple angles but not true the colors and resolution between cameras. While that’s a nice to have if your style permits it, I don’t think it’s a requrement. Part of the point in switching points of view is to maintain the viewer’s interest. Having the additional views look differently helps with that.

  3. Thanks for some helpful tips. I need to mix the audio for two separate inputs – computer recording and microphone and it is (to my knowledge) impossible to line the two audio tracks up perfectly as ScreenFlow only permits moving audio/video at a certain resolution – which is too low to time it perfectly so the audio do not phase. Is there a work-around for this?

    Rasmus from Denmark
    Screen Casting Ableton Live and Push Tutorials

    • Lynn Elliott

      HI Ras,
      You can zoom in the timeline up to 1/10th of a second. And with ScreenFlow 4, we also have included a timecode right above the timeline. However, that said, it is still a manual process to line up 2 clips on the timeline at this time.

      How would you like to see that work?

      • matt c

        I also have the same setup and am facing the same issue as Rasmus – Is there a way to do this similar to how it is done in Final Cut Pro X with multi cam sync with audio (where there is an option to have FCPX attempt to sync the 2 separate inputs – i.e. external mic as well as computer recording – by using the audio tracks to sync then up ? Right now the way I do it is to export to FCPX and do the editing there – but the screen resolution gets mangled somewhat and i end up with massive files during the export and import, Typically my original recordings are at 1920×1200 and are circa 1-2 hrs in length. The alternative would be to do all the editing inside screenflow but the audio/video syncing needs to be done by hand which is a pain and i am not as familiar with the tools as I am with the FCPX.

        Suggestions welcome.


        Matt C.

      • jqp

        Lynn, the concern I had as I watched Screenflow in action, and the reason I didn’t choose to invest in it, is that the audio sync isn’t accurate, not in the way that it would need to be to accomplish the quality I’m after.

        The increment used for nudging, as small as it is, is still simply too lengthy. I watched as a peer attempted to align two audio tracks. He couldn’t get the two perfectly aligned. The best he could do was align them within one nudge, enough to make the audio appear sloppy.

        Why in the world would development force snapping to the timeline as it does? It is a limitation of the underlying architecture?

  4. Excelent post. Great value for making better videos.

    Thanks a lot for sharing.

    I just bought a shirt microphone to record audio with my iphone at conferences where the camara is too far away to capture great audio.

    Searching for editing tips to sync audio in Screenflow, I found this great artícle, which have inspired me to make multi camara videos. This will be fun and increase the quality of my videos.

    If you would like to see my progress, follow me at

    Thanks again. Im so exited 🙂

    Have a nice

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Back to Top